ANERN Solar Inverter Hybrid 48v 10.2KW 8.2KW Off Grid Tie Inverter 180A MPPT Charger 240v Max PV 500V Pure Sine Wave


Price: [price_with_discount]$

Inverter use notice
1. The starting power of inductive load electrical appliances shall be at least three times of the rated power of the electrical appliances. If the starting power exceeds the inverter power, the inverter may be damaged. Please select a suitable model before purchasing.
2. Please connect the circuit correctly according to the instructions and install switches for each circuit.
3. Starting sequence: first turn on the battery switch, start the inverter, and turn on the PV, mains and load switches.
4. Shutdown sequence: turn off the switches of load, PV and mains, turn off the inverter, and finally turn off the battery.

5. It is recommended that batteries are connected. If no batteries are connected and you rely solely on the solar panel to power the load, this approach is unstable and unreliable.
6. 
It is a hybrid inverter that can be both off-grid and on-grid connected. Whether or not it can sell electricity into the grid depends on local government policy. But our solar inverters do not have VDE certification and may not be on-grid connected in some countries.

Please find an electrician to install the inverter. Installing it yourself can cause danger or damage to the equipment.

AN-EX-Pro-8200W: Single MPPT
AN-EX-Pro-10200W: Single MPPT
AN-SCI-MAX-8200W: Single MPPT

AN-SCI-MAX-10200W: Dual MPPT

Key Features: 
 ◆ Pure Sine Wave Solar Hybrid Inverter;
 ◆ Be able to run without battery;            
 ◆ One-key restoring to factory default settings;            
 ◆ Built-in Lithium battery automatic activation;            
 ◆ Bulit-in 160A MPPT solar controller(for 10.2KW), 
     140A(for 7.2KW);
 ◆ Max 7500W & 10800W solar input power respectively;
 ◆ Wide PV input voltage range (90-450VDC);    
 ◆ Built-in anti-dusk kit for harsh environment.
 ◆ Smart battery charge design to maximize battery lifespan;            
 ◆ Dual PV Input & AC output;
 ◆ WIFI available for IOS and Android systems.

INVERTER MODEL

SCI-MAX-10.2KW

SCI-MAX-8.2KW

Inverter Mode Specifications

Rated Output Power

10.2KW

8.2KW

Output Voltage Waveform

Pure Sine Wave

Output Voltage Regulation

230Vac+5%

Output Frequency

50Hz

Peak Efficiency

93%

Overload Protection

3s@≥150%load;5s@101%~150%load

Surge Capacity

2* rated power for 5 seconds

Nominal DC Input Voltage

48Vdc

Cold Start Voltage

46.0Vdc

Low DC Warning Voltage
@ load < 50%
@ load ≥ 50%


44.0Vdc
42.0Vdc

Low DC Warning Return Voltage
@ load < 50%
@ load ≥ 50%


45.0Vdc
44.0Vdc

Low DC Cut-off Voltage
@ load < 50%
@ load ≥ 50%


41.0Vdc
40.0Vdc

High DC Recovery Voltage

62Vdc

High DC Cut-off Voltage

63Vdc

No Load Power Consumption

75W

70W

Two Load Output Power

Full Load

10200W

8200W

Maximum Main Load

10200W

8200W

Maximum Second Load(battery model)

3400W

2733W

Main Load Cut Off Voltage

44VDC

Main Load Return Voltage

52VDC

Charge Mode Specifications

Utility Charging Mode

Charging Algorithm

3-Step

AC Charging Current (Max)

140Amp

MPPT Solar Charging Mode

Max. PV Array Power

PV1 Channel:5400W

8200W

PV2 Channel:5400W

IMax.PV

PV1 Channel:18A

27A

PV2 Channel:18A

Nominal PV Voltage

360Vdc

PV Array MPPT Voltage Range

90Vdc~450Vdc

Max. PV Array Open Circuit Voltage

500Vdc

Max Charging Current(AC charger plus solar charger)

160Amp

Grid-Tie Operation

Nominal Output Voltage

220/230/240VAC

Feed-in Grid Voltage Range

195~253VAC

Feed-in Grid Frequency Range

49~51士1Hz/59-61+1HZ

Nominal Output Current

44.3A

35.6A

Power Factor Range

>0.99

Maximum Conversion Efficiency(DC/AC)

98%

General Specifications

Safety Certification

CE

Operating Temperature Range

-10°C to 50°C

Storage temperature

-15°C~ 60°C

Humidity

5% to 95% Relative Humidity (Non-condensing)

Dimension(D*W*H),mm

530*390*130mm

Net Weight, kg

14.5

14.2

New Upgrade:

The MPPT access of MAX-10200 is changed from 1 channel 27A to 2 channels 18A, the whole series still has dual PV input and dual AC output, and the whole series adopts the newly developed color display, which is more high-grade.




Benefits of DUAL MPPT:

1. Two ways total 36A, can connect more powerful solar panels.

2.Two MPPT are independent of each other, one damage does not affect the other, more stable.




How to distribute between two load outputs:

Primary output and secondary output can be used at the same time under normal circumstances.


1) The primary output + secondary output cannot exceed 10.2KW;

2) If power is supplied only in battery mode, the primary output is not affected;

(3) No matter how many KW the primary output is powered by battery mode only, the secondary output cannot exceed this 3400W (the two together cannot exceed 10.2KW)

4) The switch of the main circuit depends only on the battery voltage, below 44V, the main circuit will be directly closed: this trigger condition is no utility, no PV, only battery; but the secondary circuit will continue to open until the battery is below the discharge protection voltage.


When there is no mains and no PV and the battery is low, the primary output will be switched off and the secondary output will be retained, which is 3400W.

The AN-SCI02 Pro series all in one solar system is the perfect go-to solution for off-grid, backup power for homes, small business, and it also delivers a value added, easy to install system that provides efficient power globally for every need.

Features:
◆ Pure Sine Wave Inverter (off Gird)
◆ Self-consumption and feed-in to the grid
◆ Inverter running without battery
◆ One-click restoration to factory Settings
◆ Bulit-in Lithium battery automatic activation
◆ Bulit-in 160A(for 7.2KW/8.2KW)/180A(for 10.2KW)MPPT solar charger
◆ High PV input voltage rang(90~500VDC)
◆ Bulit-in anti-dusk kit for harsh environment
◆ Communicate with WIFI for IOS and Android
◆ Dual PV Input and output
◆ Touch buttom

Model

EX-Pro-8200

EX-Pro-10200

Maximum PV Input Power

8200W

10200W

Rated Output Power 

8200W

10200W

Maximum Solar Charging Current

160A

180A

GRID-TIE OPERATION

PV Input(DC)

Nominal DC Voltage/Maximum DC Voltage

360VDC/500VDC

Start-up Voltage/Initial Feeding Voltage

90VDC/120VDC

Maximum DC Voltage

500VDC

MPPT Voltage Range

90V-450VDC

Number of MPPT Trackers/Maximum Input Current

1/27A

Grid Output(AC)

Nominal Output Voltage

220/230/240VAC

Output Voltage Range

195-253VAC

Nominal Output Current

35.6A

44.3A

Efficiency (Peak) Battery to INV.

94%

Power Factor

>0.99

Feed-in Grid Frequency Range

49-51±1Hz/59-61±1Hz((Auto)

Two Load Output Power

Full Load

8200W

10200W

Maximum Main Load

8200W

10200W

Maximum Second Load(battery mode)

2733W

3400W

Main Load Cut Off Voltage

44VDC

44VDC

Main Load Return Voltage

48VDC

48VDC

OFF-GRID OPERATION

AC Input

AC Start-up Voltage/Auto Restart Voltage

120-140VAC/180VAC

Acceptable Input Voltage Range

90-280VAC or 170-280VAC

Maximum AC Input Current 

40A

50A

Nominal Operating Frequency

50/60Hz(Auto)

Surge Power

16400W

20400W

Battery Mode Output

Nominal Output Voltage

48VDC

48VDC

Output Waveform

Pure sine wave

Efficiency (DC to AC)

94%

Battery & Charger

Nominal DC Voltage

48VDC

48VDC

Maximum Solar Charging Current

160A

180A

Maximum AC Charging Current

140A

160A

PHYSICAL

Dimension, D x W x H (mm)

537*390*130mm

Net Weight (kgs)

14.2

14.5

Communication interface

WIFI

FEEDBACK
We will try to provide you with good service.
1.lf you have any question, please kindly contact us via Aliexpress message, we will reply you within 24 hours;
2.We would be grateful if you would contact us before leaving 1-3 stars feedback. we will take pleasure to provide you a satisfactory solution.
Sincerely wish you have a good shopping time and hope can bring you more happy time.

Other Articles You May Like To Read

Isuru Udana Hewapathirana

Isuru Udana Hewapathirana

As a BSc Electrical Engineer with over 7 years of experience in the solar industry, Isuru Hewapathirana is a seasoned professional in the field of solar energy. His expertise includes the design, installation, maintenance, and repair of photovoltaic (PV) systems, as well as the integration of renewable energy sources into existing electrical grids. With a focus on sustainability and efficiency, Isuru stays up-to-date on the latest technologies and industry standards, making him a reliable resource for both residential and commercial solar projects. Whether you are looking to reduce your carbon footprint with a small-scale solar panel installation or seeking a turnkey solution for a large-scale solar farm, Isuru has the skills and expertise to bring your vision to fruition.

Write Your Ideas and Suggestions to improve this post.

Leave a Reply

Your email address will not be published. Required fields are marked *