PowMr Hybrid Solar Inverter On Grid 48V 24V MPPT 120A Grid Tie Inverter 230V Pure Sine Wave Max Pv Power 6500W 6200W


Price: [price_with_discount]$

PowMr Grid-Tie Hybrid Solar Inverter is a new all-in-one inverter bulit in MPPT charge controller, combining functions of inverter, solar charger and battery charger to offer uninterruptible power support in a single device.

  • 【Extend the life of loads】This solar hybrid inverter uses advanced pure sine wave technology that supplies electrical devices with high quality and stable AC current, protects electronic products or electrical appliances and extends the service life.

  • 【LCD display and real-time monitoring】solar inverter has an LCD display that can display system data and operating status in real time. If you encounter a problem during use, the corresponding error code is displayed, which can help you fix the error easily. In addition, the inverter has LED indicators that let you know the operation of the inverter at a glance, which is very practical.

  • 【3 Safe Charging Modes】The Inverter Charger offers versatile power customization, with 3 charging modes (Solar Only, Utility First, or Solar&Utility) and 2 output modes (Solar First, Utility First). In Solar Priority Mode, the inverter maximizes solar energy utilization by intelligently switching between utility and battery, based on a set battery voltage point.

  • 【Applications】This solar inverter can power all kinds of appliances in the home or office environment, including motor appliances such as tube light, fan, refrigerator and air conditioning.

  • 【Can Work No Battery】

Specification

Table 1 Line Mode Specifications

INVERTER MODEL

4.2KW

6.2KW

Input Voltage Waveform

Pure Sine Wave(Utility or Generator)

Nominal Input Voltage

230Vac

Max AC Input Voltage

300Vac

Nominal Input Frequency

50Hz/60Hz(Auto detection)

Efficiency(Line Mode)

>95%( Rated R load,battery full charged)

Transfer Time

10ms typical(UPS);

20ms typical(Appliances)

Table 2 Inverter Mode Specifications

INVERTER MODEL

4.2KW

6.2KW

Rated Output Power

4.2KW

6.2KW

Output Voltage Waveform

Pure Sine Wave

Output Voltage Regulation

230Vac±5%

Output Frequency

50Hz

Peak Efficiency

93%

Overload Protection

3s@≥150% load;5s@101%~150% load

Surge Capacity

2* rated power for 5 seconds

Nominal DC Input Voltage

24Vdc

48Vdc

Cold Start Voltage

23Vdc

46.0Vdc

No Load Power Consumption

35W

50W

Table 3 Charge Mode Specifications

Utility Charging Mode

INVERTER MODEL

4.2KW

6.2KW

Charging Algorithm

3-Step

AC Charging Current (Max)

100A

MPPT Solar Charging Mode

INVERTER MODEL

4.2KW

6.2KW

Max. PV Array Power

6200W

6500W

Nominal PV Voltage

240Vdc

360Vdc

PV Array MPPT Voltage Range

60Vdc~500Vdc(Battery connected);

120Vdc~500Vdc(No Battery connected);

Max. PV Array Open Circuit Voltage

500Vdc

Max Charging Current(AC charger plus solar charger)

120A

Tabel 4 Grid-Tie Operation

INVERTER MODEL

4.2KW

6.2KW

Nominal Output Voltage

220/230/240VAC

Feed-in Grid Voltage Range

195-253VAC

Feed-in Grid Frequency Range

49-51±1Hz/59-61±1Hz

Nominal Output Current

18.2A

26.9A

Maximum Conversion Efficiency(DC/AC)

97%

Table 5 Two Load Output Power

INVERTER MODEL

4.2KW

6.2KW

Full Load

4200W

6200W

Maximum Main Load

4200W

6200W

Maximum Second Load(battery model)

1400W

2066W

Main Load Cut Off Voltage

26VDC

52VDC

Main Load Return Voltage

27VDC

54VDC

Important note:

Please do not select the mains priority as output priority after connecting the device to two-phase 220V/230V to avoid potential safety risks for the device. Do not connect the AC output end of the device to a saving transformer to not affect the normal life of the device.

Tips:

What kind of inverter is suitable for your devices?

Electrical devices are divided into two categories: resistive load and inductive load.

If you need the inverter to operate the resistive load (e.g. Laptop, TV, electric stove), please choose the inverter with a continuous power higher than the rated power of the device, and best use 80% of the rated power.

If you use a microwave oven, water pump, air conditioning and other devices with motor or compressor, please choose the inverter whose continuous power is 3-10 times higher than your device.


NOTE :

The battery capacity of the correct matching system is determined according to the specific usage requirements of the load and application scenarios, otherwise it will easily lead to insufficient battery capacity or excessive waste of power generation. For details, please refer to the manual recommendation or consult us.

Other Articles You May Like To Read

Isuru Udana Hewapathirana

Isuru Udana Hewapathirana

As a BSc Electrical Engineer with over 7 years of experience in the solar industry, Isuru Hewapathirana is a seasoned professional in the field of solar energy. His expertise includes the design, installation, maintenance, and repair of photovoltaic (PV) systems, as well as the integration of renewable energy sources into existing electrical grids. With a focus on sustainability and efficiency, Isuru stays up-to-date on the latest technologies and industry standards, making him a reliable resource for both residential and commercial solar projects. Whether you are looking to reduce your carbon footprint with a small-scale solar panel installation or seeking a turnkey solution for a large-scale solar farm, Isuru has the skills and expertise to bring your vision to fruition.

Write Your Ideas and Suggestions to improve this post.

Leave a Reply

Your email address will not be published. Required fields are marked *