PowMr Single Phase 3000W 5000W 110V/120VAC Output Pure Sine Wave Power Inverter DC 24V 48V with 80A MPPT Solar Charge Controller


Price: [price_with_discount]$

PowMr Single Phase 3000W 5000W 110V/120VAC Output Pure Sine Wave Power Inverter DC 24V 48V with 80A MPPT Solar Charge Controller

●Pure Sine Wave inverter.

● Higher output power up to 3000W /5000W
● 120Vac AC output.
● Supports single-phase devices.
● Fast switching time of 10ms.
● Compatible with 24V/48V lithium-ion and lead-acid battery, support user-define.
● Max. PV charging current up to 80A.
● Max. AC charging current up to 40A.
● Max. hybrid charging current up to 80A.
● 90~140Vac AC input voltage range.
● 120~450Vdc wide voltage range for PV access.
● 1 MPP Tracker, with 99.9% efficiency.
● Configure multiple communication interfaces (USB/CAN/RS485(WiFi/GPRS)/Dry node control).
● Durable finish with high anti-corrosion.
● Effective forced air cooling to ensure that the equipment runs stably.
 

Models
POW-LVM3K-24V
POW-LVM5K-48V
AC Mode
Rated input voltage
110/120Vac
Input voltage range
(90Vac-140Vac)
Frequency
50Hz/ 60Hz (auto-sensing)

50Hz/ 60Hz (auto-sensing)

Overload/short-circuit protection
Circuit breaker
Efficiency
>95%
Maximum bypass overload current
40A
63A
Inverting Mode
Output voltage waveform
Pure sine wave
Rated output power (VA)
3000
5000
Rated output power (W)

3000

5000

Rated output voltage (Vac)
120Vac
120Vac
Maximum Efficiency
>92%
>90%
Peak power
6000VA
10000VA
Loaded motor capability
2HP
4HP
Rated battery input voltage
24V (Minimum starting voltage 22V)
48V (minimum start voltage 44V)
Power saving mode
Load ≤50W
AC Charging
Battery type
Lead acid or lithium battery
Maximum charge current
(can be set)
0-40A
Charge voltage range
20–33Vdc
40–60Vdc
Breaker specification
40A
63A
Solar Charging
Maximum PV open-circuit voltage
450Vdc

500Vdc

PV operating voltage range
120~450Vdc
120-500Vdc
Battery voltage range
20~33Vdc
40-60Vdc
Maximum input power
4000W
5500W
Charge current range of solar energy
(settable)
0-80A
Authentication Specification
EMC authentication grade
EN61000
Noise
≤60dB
Communication interface
USB/RS485 (WiFi/GPRS)/dry node control
Dimension (L*W*D)
378mm*280mm*103mm
426mm*322mm*126mm
Weight (kg)
8
11.5
 
Hybrid Charging Max Charger Current (AC charger+PV charger): 80A
 

Compatible with 24V/48V lithium-ion and lead-acid battery, support user-define.

 
 

Configure multiple communication interfaces (USB/CAN/RS485(WiFi/GPRS)/Dry node control)

 

LCD display design to display the operation data and state of the system in real-time

 
 
Wide Range of Applications
It can be widely used in DC to AC areas, such as solar AC power system, vehicle systems, RV power supply, security monitoring systems, emergency lighting systems, household power systems, etc.
 
 

Other Articles You May Like To Read

Isuru Udana Hewapathirana

Isuru Udana Hewapathirana

As a BSc Electrical Engineer with over 7 years of experience in the solar industry, Isuru Hewapathirana is a seasoned professional in the field of solar energy. His expertise includes the design, installation, maintenance, and repair of photovoltaic (PV) systems, as well as the integration of renewable energy sources into existing electrical grids. With a focus on sustainability and efficiency, Isuru stays up-to-date on the latest technologies and industry standards, making him a reliable resource for both residential and commercial solar projects. Whether you are looking to reduce your carbon footprint with a small-scale solar panel installation or seeking a turnkey solution for a large-scale solar farm, Isuru has the skills and expertise to bring your vision to fruition.

Write Your Ideas and Suggestions to improve this post.

Leave a Reply

Your email address will not be published. Required fields are marked *