5000W Split Phase120V 110V AC Grid Tie 48V All In One Hybrid Inverter Built 100A MPPT Solar Charger Max Parallel 6 Inverters

Price: [price_with_discount]$

The other one 5KW Off-Grid Inverter's Specification Can Be Check By This Link

5000W Split Phase120V 110V AC Grid Tie 48V All In One Hybrid Inverter Built 100A MPPT Solar Charger Max Parallel 6 Inverters

the inverter can communicate with PowMr 100AH/200AH battery

1.Off-grid & on-grid pure sine wave inverter.
2. Maximum number of parallel connections is 6.
3. Higher output power up to 5000W.
4. 120/208/240VacAC output.( only can achieve in Parallel system)
5. Supports single-phase/split-phase/three-phase devices.
6. Fast switching time of 10ms.
7. Compatible with 48V lithium-ion and lead-acid battery, support user-define.
8. Max. PV charging current up to 100A.
9. Max. AC charging current up to 40A.
10. Max. hybrid charging current up to 100A.
11. 90~140Vac AC input voltage range.
12. 120~500Vdc wide voltage range for PV access.
13. Higher input DC current up to 22A in a single circuit.
15. Energy saving mode function to reduce no-load energy losses.
16. Configure multiple communication interfaces (RS485/USB/Dry contact).
17. Durable finish with high anti-corrosion.
18. Effective forced air cooling to ensure that the equipment runs stably.

POW-SunSmart SP5K
AC Mode
Rated input voltage
50Hz/ 60Hz (Auto detection)
Overload/short circuit protection
Circuit breaker
AC reverse protection
Maximum bypass overload current
Inverter Mode
Output voltage waveform
Pure sine wave
Rated output power
Rated output power
Power factor
Rated output voltage
120Vac Rated output voltage (100/105/110Vac Settable)
Maximum Efficiency
Peak power
Loaded motor capability
Rated battery input voltage
48V (Minimum starting voltage 44V)
Battery voltage range
Undervoltage alarm/ shutdown voltage/ overvoltage alarm/
overvoltage recovery… settable on LCD screen
Power saving mode self-consumption
Load ≤ 50W
AC Output (Grid)
Rated Output Power
Max. apparent power


Max. output current
Rated voltage
AC Charging
Battery type
Lead acid or lithium battery
Maximum charge current (can be set)
Charge voltage range
Circuit breaker specifications
Overcharge protection
Alarm and turn off charging after 1 minute
PV Charging
Maximum PV open circuit voltage
PV operating voltage range
MPPT voltage range
Battery voltage range
Maximum PV input power
Maximum PV input current
PV charging current range (can be set)
Hybrid charging Max charger current specifications (AC charger + PV charger)
Max charger current(can be set)
Certified specifications
EMC certification level
Operating temperature range
-10°C ~ 55°C
Storage temperature range
-25°C ~ 60°C
Heat dissipation
Forced air cooling, variable speed of fan
Communication interface
USB/RS485(WiFi/GPRS)/Dry contact control
Dimension (L*W*D)

Pure sine wave All-in-One inverter5000W DC 48V hybrid solar inverter, 120/208V/240Vac Output . ( single-phase,split Phase and three-phase ), Built-in 100A MPPT solar charge controller

Multiple protection Designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status, and complete protections, including short circuit protection, over voltage and under voltage protection, overload protection, reverse protection, etc.

Support 48V Lead acid or lithium battery or batteryless mode, Support Parallel up to 6 inverters.

4 charge/ 2 discharge modes Support 4 charging modes:Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging; mains bypass and inverter output two output mode, uninterrupted power supply; Anti-backflow grid connection function, support for use without battery, can be set up for on-grid power generation.

Intelligent power saving Power saving mode available to reduce no-load loss, With time slot control, you can set the priority of using the mains and battery according to the time slot in conjunction with the local peak and valley tariffs.

Other Articles You May Like To Read

Isuru Udana Hewapathirana

Isuru Udana Hewapathirana

As a BSc Electrical Engineer with over 7 years of experience in the solar industry, Isuru Hewapathirana is a seasoned professional in the field of solar energy. His expertise includes the design, installation, maintenance, and repair of photovoltaic (PV) systems, as well as the integration of renewable energy sources into existing electrical grids. With a focus on sustainability and efficiency, Isuru stays up-to-date on the latest technologies and industry standards, making him a reliable resource for both residential and commercial solar projects. Whether you are looking to reduce your carbon footprint with a small-scale solar panel installation or seeking a turnkey solution for a large-scale solar farm, Isuru has the skills and expertise to bring your vision to fruition.

Write Your Ideas and Suggestions to improve this post.

Leave a Reply

Your email address will not be published. Required fields are marked *