Anern 8.2KW 10.2KW Hybrid Solar Inverter Build-in Mppt 140A Controller 500VDC PV Input 230VAC 48V Pure Sine Wave Hybrid Inverter


Price: [price_with_discount]$

Anern 8.2KW 10.2KW Hybrid Solar Inverter Build-in Mppt 140A Controller 500VDC PV Input 230VAC 48V Pure Sine Wave Hybrid Inverter

Model

SCI-MAX-8200

SCI-MAX-10200

RATED POWER

8200W

10200W

Maximum PV Input Power

8200W

10800W

GRID-TIED OPERATION

PV INPUT (DC)

Nominal DC Voltage/Maximum DC Voltage

360VDC/500VDC

Start-up Voltage/Initial Feeding Voltage

90VDC/120VDC

MPPT DC Voltage Range

90-450VDC

Number of MPPT Trackers/Maximum Input Current

1/27A

2/18A

GRID OUTPUT (AC)

Nominal AC Output Voltage

220/230/240VAC

AC Output Voltage Range

195.5-253VAC

Nominal AC Output Current

35.6A

44.3A

Power Factor

>0.99

Feed-in Grid Frequency Range

49-51±1Hz / 59-61±1Hz

EFFICIENCY

Maximum Conversion Efficiency (Solar to AC)

98%

TWO LOADS OUTPUT POWER

Full Load

8200W

10200W

Maximum Main Load

8200W

10200W

Maximum Second Load (battery mode)

2733W

3400W

Main Load Cut Off Voltage

44VDC

44VDC

Main Load Return Voltage

48VDC

48VDC

OFF-GRID OPERATION

AC Start-up Voltage/Auto Restart Voltage

120-140VAC/180VAC

Acceptable AC Input Voltage Range

90-280VAC or 170-280VAC

Maximum AC Input Current

40A

50A

Nominal Operating Frequency

50/60Hz

Surge Power

16400W

20400W

BATTERY MODE OUTPUT (AC)

Nominal Output Voltage

220/230/240VAC

Output Waveform

Pure sine wave

Efficiency (DC to AC)

94%

BATTERY & CHARGER

Nominal DC Voltage

48VDC

48VDC

Maximum Charging Current(Solar to AC)

160A

160A

Maximum AC Charging Current

140A

160A

GENERAL

Dimension, D x W x H (mm)

500*390*130mm

530*390*130mm

Net Weight (kgs)

13.1kg

14.5kg

Communication interface

WIFI

Humidity

5% to 95% Relative Humidity (Non-condensing)

Operating Temperature

–10°C – 50°C

Storage Temperature

–15°C – 60°C
Dual output function description:

The main and secondary outputs are used in normal condition. But in the following two conditions, the main output is disconnected and only the secondary output is retained:
– when there is no solar power input and mains power input;
– when the battery voltage is lower than 44V (the minimum can be set to 41V, and the maximum can be set to 46V)

Upgrade:

The MPPT access of MAX10200 is changed from 1 channel of 27A to 2 channels of 18A(Dual MPPT), still with dual PV input and dual AC output, and the newly developed color display is adopted in the whole series.

 
Tips:
 
In order to achieve stable operation of the solar system and save electricity bill, it is recommended to connect the battery; when the mode is set to SBU, the system will use the PV and battery first and the utility last.

Dual output function description:

The main and secondary outputs are used in normal condition. But in the following two conditions, the main output is disconnected and only the secondary output is retained:

– when there is no solar power input and mains power input;

– when the battery voltage is lower than 44V (the minimum can be set to 41V, and the maximum can be set to 46V)

Model

SCI-EVO-3600

SCI-ECO-6200

RATED POWER

3600W

6200W

Maximum PV Input Power

6200W

6500W

GRID-TIED OPERATION

PV INPUT (DC)

Nominal DC Voltage/Maximum DC Voltage

360VDC/500VDC

Start-up Voltage/Initial Feeding Voltage

90VDC/120VDC

MPPT DC Voltage Range

90-450VDC

Number of MPPT Trackers/Maximum Input Current

1/27A

GRID OUTPUT (AC)

Nominal AC Output Voltage

220/230/240VAC

AC Output Voltage Range

195.5-253VAC

Nominal AC Output Current

15.7A

27.0A

Power Factor

>0.99

Feed-in Grid Frequency Range

49-51±1Hz / 59-61±1Hz

EFFICIENCY

Maximum Conversion Efficiency (Solar to AC)

98%

TWO LOADS OUTPUT POWER

Full Load

3600W

6200W

Maximum Main Load

3600W

6200W

Maximum Second Load (battery mode)

1200W

2067W

Main Load Cut Off Voltage

22VDC

44VDC

Main Load Return Voltage

26VDC

52VDC

OFF-GRID OPERATION

AC Start-up Voltage/Auto Restart Voltage

120-140VAC/180VAC

Acceptable AC Input Voltage Range

90-280VAC or 170-280VAC

Maximum AC Input Current

30A

40A

Nominal Operating Frequency

50/60Hz

Surge Power

7200W

12400W

BATTERY MODE OUTPUT (AC)

Nominal Output Voltage

220/230/240VAC

Output Waveform

Pure sine wave

Efficiency (DC to AC)

94%

BATTERY & CHARGER

Nominal DC Voltage

24VDC

48VDC

Maximum Charging Current(Solar to AC)

120A

Maximum AC Charging Current

100A

GENERAL

Dimension, D x W x H (mm)

420*350*110mm

450*350*110mm

Net Weight (kgs)

9

10

Communication interface

WIFI

Humidity

5% to 95% Relative Humidity (Non-condensing)

Operating Temperature

–10°C – 50°C

Storage Temperature

–15°C – 60°C

Features of Module

Pure Sine Wave Solar Inverter.

Self-consumption and feed-in to the grid.

Inverter running without battery.

One-key restoration to factory settings.

Built-in Lithium battery automatic activation.

Bulit-in 120A MPPT solar controller.

Max 6200W(for 3.6KW) & 6500W(for 6.2KW) solar charge.

High PV input voltage range(90-450VDC).

Built-in anti-dusk kit for harsh environment.

Smart battery charge design to optimize battery life.

Dual Output.

WIFI available for IOS and Android.

Tips

– There is only one MPPT, and the dual PV input is to facilitate solar panel wiring and reduce the use of combiner box.

– The benefits of comparing dual MPPT: single entry, good consistency of machine control.

– The secondary output in the dual output is for emergency use, the power is only one-third of the main output, when there is no PV utility input, and the battery voltage is too low, only when the secondary output will be used, under normal circumstances do not need to connect.

There is a detailed tutorial on the product manual, or you can consult our store customer service staff.

Features:

 ◆ Pure Sine Wave Inverter(on/off Gird)

◆ Self-consumption and feed-in to the grid

◆ Inverter running without battery

◆ One-click restoration to factory Settings

◆ Bulit-in Lithium battery automatic activation

◆ Bulit-in 160A(for 7.2KW/8.2KW)/180A(for 10.2KW)MPPT solar charger

◆ High PV input voltage rang(90~500VDC)

◆ Bulit-in anti-dusk kit for harsh environment

◆ Communicate with WIFI for IOS and Android

◆ Dual PV Input and output

◆ Touch buttom

Advantage:

1. PV dual input, AC dual output;

2. Dual PV input: facilitate the connection of solar panel and reduce the use of combiner box;

3. AC dual output: under normal conditions, the main circuit and secondary circuit outputs are used normally. When there is no PV and mains power input and the battery voltage is too low, the main circuit is disconnected and only the secondary circuit output is retained to save power.

Model

EX-Pro-7200

EX-Pro-8200

EX-Pro-10200

Maximum PV Input Power

8200W

8200W

10200W

Rated Output Power

7200W

8200W

10200W

Maximum Solar Charging Current

160A

160A

160A

GRID-TIE OPERATION

PV Input(DC)

Nominal DC Voltage/Maximum DC Voltage

360VDC/500VDC

Start-up Voltage/Initial Feeding Voltage

90VDC/120VDC

Maximum DC Voltage

500VDC

MPPT Voltage Range

90V-450VDC

Number of MPPT Trackers/Maximum Input Current

1/27A

Grid Output(AC)

Nominal Output Voltage

220/230/240VAC

Output Voltage Range

195-253VAC

Nominal Output Current

31.3A

35.6A

44.3A

Efficiency (Peak) Battery to INV.

94%

Power Factor

>0.99

Feed-in Grid Frequency Range

49-51±1Hz/59-61±1Hz

Two Load Output Power

Full Load

7200W

8200W

10200W

Maximum Main Load

7200W

8200W

10200W

Maximum Second Load(battery mode)

2400W

2733W

3400W

Main Load Cut Off Voltage

44VDC

44VDC

44VDC

Main Load Return Voltage

48VDC

48VDC

48VDC

OFF-GRID OPERATION

AC Input

AC Start-up Voltage/Auto Restart Voltage

120-140VAC/180VAC

Acceptable Input Voltage Range

90-280VAC or 170-280VAC

Maximum AC Input Current

40A

40A

50A

Nominal Operating Frequency

50/60Hz

Surge Power

14400W

16400W

20400W

Battery Mode Output

Nominal Output Voltage

48VDC

48VDC

48VDC

Output Waveform

Pure sine wave

Efficiency (DC to AC)

94%

Battery & Charger

Nominal DC Voltage

48VDC

48VDC

48VDC

Maximum Solar Charging Current

160A

160A

160A

Maximum AC Charging Current

140A

140A

140A

PHYSICAL

Dimension, D x W x H (mm)

537*390*130mm

Net Weight (kgs)

14.2

14.2

14.5

Communication interface

WIFI

FAQ:

Q:Whether to start with battery?
A:No
Q:Whether it can directly supply power to the load?
A:YES
Q:Whether it can be connected to the grid?
A:PV gives priority to power supply to the load, and extra to charge the battery, and more can be integrated into the grid (need to be based on local government policies)(1600W and 3000W models cannot send remaining power)
Q: How many solar panels need to be connected?
A: In order to start the inverter normally, the voltage of the solar panel is recommended to be 300V-400V, The maximum does not exceed 500V. For PRO-3.6KW/PLUS-6.2KW, and the power of the solar panel is not more than 6.2KW/6.5KW. For example, 10 pcs of 250W 30V solar panels are connected in series.
Q: Can inverters be connected in series or parallel?
A: NO.
Q: Is this a on grid-tied inverter? Can it be output to utility?
A: YES. It is a hybrid inverter that can be both off-grid and on-grid connected
Q: Does the inverter have to be connected to the battery?
A: Can be connected with or without battery, but without the battery, the voltage of the solar panel should exceed 360Vdc.
Q: What types of batteries can be used?
A: Lead-acid batteries, gel batteries,Lithium Iron Phosphate(LiFePo4) and lithium batteries can be used. 24V battery for 3.6KW, 48V battery for 6.2KW. The battery cannot be less than 100AH.
Q: Can it be used in air conditioners, water pumps, and wind turbines?
A: It can be used in air conditioners, but not in water pumps and wind turbines.
Q: Is it a high frequency inverter or a low frequency inverter?
A: High frequency
Q: Can the utility be used to power the inverter when there is no sun?
A: YES.
Q: How to choose the power of the inverter according to the household appliances?
A: If household appliances contain inductive load appliances, such as refrigerators, washing machines, air conditioners, etc., the power of the inverter is at least three times the total power of the inductive load appliances, otherwise the appliances may not be able to start.
Q: Is it possible to use PV, battery, grid supply at the same time?
A: YES. The default PV priority mode, when the PV input is insufficient, the battery and utility will be used.

Other Articles You May Like To Read

Isuru Udana Hewapathirana

Isuru Udana Hewapathirana

As a BSc Electrical Engineer with over 7 years of experience in the solar industry, Isuru Hewapathirana is a seasoned professional in the field of solar energy. His expertise includes the design, installation, maintenance, and repair of photovoltaic (PV) systems, as well as the integration of renewable energy sources into existing electrical grids. With a focus on sustainability and efficiency, Isuru stays up-to-date on the latest technologies and industry standards, making him a reliable resource for both residential and commercial solar projects. Whether you are looking to reduce your carbon footprint with a small-scale solar panel installation or seeking a turnkey solution for a large-scale solar farm, Isuru has the skills and expertise to bring your vision to fruition.

Write Your Ideas and Suggestions to improve this post.

Leave a Reply

Your email address will not be published. Required fields are marked *

© Off Grid Solar Market. Design and Developed by Zigma Solutions All Rights Reserved.