Price: [price_with_discount]$
Introduction
This is a multi-function Inverter/charger, combining functions of inverter, solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Features
◆Pure sine wave inverter
◆Configurable input voltage range for home appliances and personal computers via LCD
setting
◆Configurable battery charging current based on applications via LCD setting
◆Configurable AC/Solar Charger priority via LCD setting
◆Compatible to mains voltage or generator power
◆Auto restart while AC is recovering
◆Overload/Over temperature/short circuit protection
◆Smart battery charger design for optimized battery performance
◆Cold start function
◆Charging Mode① Solar panel priority ②Electricity Utility Priority
◆Supporting battery type: ternary lithium battery, lithium iron phosphate, lead-acid battery and so on
Battery Equalization Description
Equalization function is added into charge controller, It reverses the buildup of negative chemical effects like stratification, a condition where acid concentration is greater at the bottom of the battery than at the top. Equalization also helps to remove sulfate crystals that might have built up on the plates. If left unchecked, this condition, called sulfation, will reduce the overall capacity of the battery. Therefore, it’s recommended to equalize battery periodically.
3kw max solar panel input voltage is 145VDC, 5000W is max 450vdc, please attention
|
Model |
1KW-12V |
2KW-24V |
3KW-24V |
5KW-48V |
|
|
Input |
input format |
L+N+PE |
|||
|
Rated input voltage |
208/220/230/240vAC |
||||
|
voltage range |
154-264VAC+3V (normal mode) 185-264VAC±3v (UPS mode) |
||||
|
Frequency Range |
50Hz/60Hz (adaptive) |
||||
|
Output |
Output rated power |
1000W |
2000W |
3000W |
5000W |
|
The output voltage |
208/220/230/240VAC士5% |
||||
|
Output frequency |
50/6OHz士0.1% |
||||
|
waveform |
Pure Sine Wave |
||||
|
Switching time (Adjust) |
Computer equipment 10ms, |
||||
|
peak power |
200ovA |
4000vA |
6000vA |
100oovA |
|
|
overload capacity |
Battery Mode: |
||||
|
Peak Efficiency |
>93% |
>93% |
>94% |
>94% |
|
|
Battery |
Rate voltage |
12Vdc |
24Vdc |
24Vdc |
48Vdc |
|
Battery constant voltage |
14.1Vdc |
28.2vdc |
28.2vdc |
56.4vdc |
|
|
Float voltage(Adjust) |
13.5Vdc |
27vdc |
27vdc |
54vdc |
|
|
Charging |
PV charging method |
PWM |
PWM |
MPPT |
MPPT |
|
Max PV input |
600W |
1200W |
1500W |
5500W |
|
|
MPPT tracking range |
N/ A |
N/ A |
30~115Vdc |
120~430Vdc |
|
|
Max PV input Voltage |
145VDC |
450VDC |
|||
|
Max PV Charging Current |
50A |
50A |
60A |
60A |
|
|
Maximum mains |
50A |
50A |
60A |
60A |
|
|
Max charging current |
100A |
100A |
120A |
60A |
|
|
Screen |
LCD port |
Can display operating mode/load/input/output, etc. |
|||
|
interface |
RS232 |
5PIN/Pitch2.0mm, baud rate 2400 |
|||
|
Expansion slot |
2×5PIN/Pitch2.54mm, lithium battery BMS communication card, |
||||
|
Parallel interface |
No parallel function |
With parallel function |
|||
|
Environmental |
Operating |
0~40c |
|||
|
Operating |
20%~95% (no condensation) |
||||
|
Storage temperature |
0`60 degree |
||||
|
Altitude |
Altitude should not exceed 1000m, derating above 1000m, |
||||
|
noise |
≤50db |
||||
If you need to connect many inverter in parallel, please buy parallel version( only 5KW verison can connect in parallel), otherwise, inverter can't connect in parallel.
